THE EFFECTS OF CURING DELAY ON THE COMPRESSIVE STRENGTH OF CONCRETE

OGBONNA ISWELL NWOJIJI (NAU/2016224055)

Abstract


This project was carried out to determine the effects of curing delay on the compressive strength of concrete, using a 19mm granite (coarse aggregates) from Isheagu. Ebonyi state and uniformly graded sand from Omambara in Anambra state .A total of fifteen concrete cubes with mix ratio of 1:2:4 and the Cement-water ratio of 0.55 were casted and used for the experiment .Three cube were used for each set of samples, each set used for its corresponding curing delay. They are grouped as samples A1,A2,A3 for the zero delay,samples B1,B2,B3 for 7 days delay, samples C1,C2,C3 for 14 days delay, Samples D1,D2,D3 for 21 days delay and samples E1,E2,E3 for 28 days delay. All the samples were cured after their respective curing delay and the tested for its compressive strength on the 28th day. It was discovered that their compressive strength consistently decreased with increased curing delay but the effects is highest at the early age of the concrete (i.e. between sampleswith zero delay and samples with 7 days delay. The final results showed that curing delay leads to a corresponding decrease in the compressive strength in concrete production

Full Text:

PDF

References


ASTM C192 / C192M, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory (www.astm.org)

Augustyn 2021, Concrete Material. Accessed last on November 5th 2021.

Www.Britannica.com.

D P Bentz,2006; Drying/hydration in cement paste during curing. Building and fire Research laboratory, National institute of standard and technology Gaithersburg of Denmark Lyngby, Denmark.

David O. Nduka, Olabosipo I. Fabgbenle, Opeyemi Joshua, Ayodeji O. Ogunde, Ignatus O. Omuh, Compressive Analysis of Concrete Strength Utilizing Quarry-Crushed and

Locally Sourced Coarse Aggregates, International Journal of Mechanical

Engineering and Technology 9(1), 2018, pp. 609-617.

http://www.iaeme.com/IJMET/issues.asp?JType=IJMET &VType=9&IType=1

Ejiofor,2019 "Relation Between Compressive and Tensile Strength of Concrete" . Archived

from the original on 6 January 2019. Retrieved 6 January 2019.

Gagg, Colin R. (1 May 2014). "Cement and concrete as an engineering material: An historic

appraisal and case study analysis" . Engineering Failure Analysis. 40 : 114–140. doi :

1016/ j.engfailanal.2014.02.004 . ISSN 1350-6307.

Gospal Mishra ,2015 ; Material testing guide Accessed on December 29th 2021.

Haseeb Jamal Mar ,2017: Definition and Methods of Curing of Concrete Accessed on

November 13th, 2021. (https://www.about civil.org).

Hussein Talab Nhabih, 2018. Effect of Delayed Curing Start on Durability and Mechanical

Properties of High and Normal Strength Concrete. Journal of Engineering and

Applied Sciences, 13: 8216-8223. https//medwelljournal.com.

Hussein Talab Nhabih, Ameer Mohsin Hashim and Marwa Marza Salman, 2018. Effect of

Delay Curing Start on Durability and Mechanical Properties of High and Normal

Strength Concrete. Journal of Engineering and Applied Sciences, 13: 8216-8223.

(https//med well journal.com)

Juan Rodriguez,2019; Curing of concrete with water and plastic membrane. Updated on

January 24th 2019. Accessed on October 14th, 2021.

Krishna M . V ,Kumar . P and Khan A. M ,2010; A study on the influence of curing on a

standard grade concrete Mix. Architecture and civil engineering 8(1).23-34.

Accessed on November 11th 2021.

M.A.K , S.H. The effect of curing period and curing delay on concrete in hot weather.

Materials and Structures 21, 205–212 (2011). https://doi.org/10.1007/ BF02473057.

MMS Hussen Talab Nhabih, Ameer Mohsin Hashim ;Effect of Delayed Curing Start on

Durability and Mechanical Properties of High and Normal Strength Concrete Journal of Engineering and Applied Sciences 13 (10), 8216-8223, 2018. (https//.goggle.com).

PCA Manual 2012: Designing and Proportioning Normal Concrete Mixtures" (PDF). PCA manual. Portland Concrete Association. Archived (PDF) from the original on 26 May 2012. Retrieved Oct 2012.

S. P. Dunuweera and R. M. G. Rajapakse, “Cement types, composition, uses, environmental

impact and possible solutions,†in Proceedings of the 28th International Symposium on Transport Phenomena, Peradeniya, Sri Lanka, September 2017. View at: Google Scholar. (https://do I.org/10.1155/2018/4158682)

Suryakanta, 2016; Engineering properties of Aggregates. Accessed on 10th November, 2021.

(Civil blog.org)


Refbacks

  • There are currently no refbacks.


Copyright © 2022. Department of Civil Engineering, Nnamdi Azikiwe University, Awka, Nigeria.  All Rights Reserved.


Powered by Myrasoft Systems Ltd.(http://www.myrasoft.ng)